1/4 Turn Ball Valve: Fits Standard Garden Hose - Installs From Outside of Drum or Barrel Best used at the bottom drain

        Use the included hole saw to make the necessary opening for the threaded seal. Screw 1/4 turn valve into place. Make sure

        Use the 1.25inch hole saw tofor the installation of threaded seal. Bent Neck 1/4 Turn Ball Valve screws into the seal.

        Rain Barrel Spigot: Fits Standard Garden Hose - Installs From Outside of Drum or Barrel Bent neck is best installed a

      Installation: Screw the EarthMinded 1/4 Turn Bent Neck Full Flow Spigot into the Threaded Seal ( hold the tab of the Threaded

          Key Features 3 sizes in this set. One for each of the 3 holes required. Large bit to cut the downspout for the

            One side of the Drain Assembly is threaded so it will screw into the .75 inch Threaded Seal opening. (The

          FlexiFit Diverter for 3 and 4 inch Round Downspouts Don't want to cut your downspouts to install a rain

                FlexiFit Diverter for 3inch x 4inch Rectangular Downspouts Don't want to cut your

            FlexiFit Diverter for Rectangular Downspouts Don't want to cut your downspouts to install a rain